- ページ 10
折りたたみ機 Duplo DBM-120のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Duplo DBM-120 12 ページ。 Connecting kit
model: dc-6000s;dc-8000s 2;
dc-10000s
Duplo DBM-120 にも： インストレーション・マニュアル (13 ページ)
ページを印刷する
1
Connect the earth wires 1 and 2 provided to this unit and the DSF-2000.
Earth wire 1
DBM-120 Sheet by Sheet
1
Insert the power plug into the outlet.
NOTE
: Move the DBM-120 Sheet by Sheet unit to and fro when changing the paper size. Move aside the power cord
so that it does not touch the DBM-120 Sheet by Sheet at this time.
2-6. Checking the Installation Position
1
Turn on the power supply of this unit, and set to the A3 size.
Refer to "6-1. Basic Operation" in the instruction manual of this unit for details on setting
the paper size.
2
Adjust at the long holes of the connecting
plate so that the notch of the paper
ejection guide of the DSF-2000 aligns with
the A3 mark on the indication label of this
unit, and tighten the screws temporarily
secured in step 3 of the section "2-2." to
s e c u r e t h e c o n n e c t i n g p l a t e a n d
DSF-2000.
2-4. Connecting the Earth Wire
DSF-2000
2-5. Connecting the Power Supply
2. INSTALLATION PROCEDURE
Earth wire 2
DSF-2000
DBM-120 Sheet by Sheet
Notch of paper ejection
guide of DSF-2000
Indication label of DBM-120
Sheet by Sheet
7