- ページ 4

サブウーファー AudioEngine AS8のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。AudioEngine AS8 10 ページ。 Premium powered 8" subwoofer
AudioEngine AS8 にも：仕様 (2 ページ), 補足マニュアル (2 ページ)

ページを印刷する

1. Setup Diagrams

Audioengine S8 Features

•

Super-compact size

•

8" custom down ring woofer

•

Wireless-ready!

•

Solid hand- nished, front-ported cabinet

•

Auto sleep power saving mode

•

Dual line-level inputs (RCA and mini-jack)

•

All cables included

•

Excellent performance for music, movies, and videogames

•

A perfect bass extension for Audioengine powered speakers!

Wireless Ready!

If you decide to place your AS8 away from your powered speakers or

receiver, check out the Audioengine W1 wireless adapters (shameless prod-

uct plug) or Apple's Airport Express for high-quality wireless options. The

AS8 has a built-in AC outlet on the rear panel that's perfect for powering

these wireless products.

Controls

Your AS8 Powered Subwoofer o ers simple yet versatile setting options.

After you've become familiar with what these settings do, don't hesitate to

experiment with them to nd the sound that works best with your system.

When you set up your subwoofer for the rst time, you will probably make

adjustments a few times before you hear what you like. Start with the

volume at 50% and keep in mind that as with subwoofer room placement,

there are really no right or wrong settings.

audioengine S8 setup guide

Following is an overview of the subwoofer controls and connections:

OUTPUT

INPUTS

AUX OUTLET

Unswitched

110–120VAC 60Hz 1A

220–240VAC 50Hz 0.5A

120W MAX

LFE IN

AS8

AC SELECT

FOR 110–120V: T3.15AL

FOR 220–240V: T2AL

Replace with

~AC

110–120V 2.5A

same rating

220–240V 1.6A 60Hz/50Hz

and type

1 Inputs

The RCA and 3.5mm mini-jack inputs are line-level audio inputs used for

connecting the output of your audio source (receiver, TV, iPod, computer,

etc.) into your AS8 subwoofer. Both inputs are active so no switching is

required if you wish to use inputs from 2 di erent audio sources plugged

in at the same time.

Note: If your receiver has a single (mono) subwoofer output, connect an RCA-

cable from this output to the RIGHT RCA input on the AS8 rear panel.

2 LFE In

If your preampli er or receiver has an LFE ("Low Frequency E ects") input

or single SUB output connect it to this "LFE In" input connector on the

subwoofer.

Note: Most receivers have a subwoofer preamp mono or stereo output, so

LFE will most-likely remain unconnected.

audioengine S8 setup guide