- ページ 2

モビリティ・エイド Freedom Innovations Plie 3のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Freedom Innovations Plie 3 4 ページ。 Mpc knee

FREEDOM INNOVATIONS

Charging Batteries

For optimal performance, alternate batteries every day. To charge, align

the

red

dot on the battery with the

red

charger is also included.

The Status LED will illuminate

red

if the charger has power. The Charge

LED will illuminate

red

, indicating the battery is charging. When the

battery is completely charged, the LED will illuminate

LED stays

red

for more than four hours, this indicates that the battery is

either damaged or worn out. The temperature of the battery should be

kept between 8 °C and 38 °C (46 °F to 100 °F) while charging. If the

temperature goes outside this range, the Charge LED will shutoff

indicating that charging was stopped before the battery was fully

charged.

dot on the charger. A 12V car

green

. If the Charge

Battery Cap Closed

Inserting Batteries

1. To Open: Press down latch. The cap will spring open.

2. Insert the battery, aligning the

red

down the top portion of the battery label to ensure water

tightness. Also, be sure the gasket on the bottom side of the cap

is clean and free from dirt and debris.

3. Close the battery compartment by pressing firmly on the entire

cap until latch engages.

dots. Be sure to properly fold