ページを印刷するVOLUME
Trig the input volume of the amplifier, from -120dB to +10dB (+20dB total group). Turning
the knob before entering main menu without pushing is a shortcut to this feature.
Recalling a preset (as explain in load preset) will reset the volume to 0db.
DELAY
Trig the input delay of the amplifiers (delay stack or balcony as application example).
at first the delay change as ms. Pushing the knobs will give the triming to 10ms and then
samples. turning the knobs change the parameters.
After 3 secondes, the main screen come back.
LOAD PRESET
Recall the preset needed regard the application (go to 4.2 preset selection for information
on choosing the right preset).
Turn the knobs till the right name is display, than push the knobs to recall the preset. The
firmware go back to main screen automatically.
SET IP
Change the IP address of the amplifier. This is related to the AF network manager
software (our dedicate software-remote control of the amplifier with computer). Turning
the knobs change the sector number and pushing the knobs selected the next sector.
SOURCE
Selection of the input source of the amplifier. analog (input 1)AES (input2) AESOP.
AESOP
AESOP allow to redirect the AES signal thru RJ45 connector. The first module, receiving
signal thru another port than RJ45, should be MASTER and the other should be in SLAVE
mode.
AUDIOFOCUS ARES12
Page
8
sur
14
USER'S MANUAL