- ページ 3

ストレージ 3Ware RDC-400のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。3Ware RDC-400 4 ページ。 Raid drive cage

See figure 3.

5. Insert the hard drive into the disk tray.

6. Install the mounting screws on each side to secure the drive in the disk

tray.

7. Slide the tray into a slot until it clicks into place.

8. Insert the key (included in your package) into the keylock located on the

right of the front panel and turn it clockwise. This will lock the disk tray

into the subsystem providing data security and provide power to the drive.

If you are replacing a hard drive, make sure to unlock it by turning the key

counter-clockwise.

NOTE: When the hard drive is being accessed, the HDD activity LED

illuminates.

Hot Add/Removing Disk

The cage supports 'Hot add and remove' by turning power off to the drive

when the key is moved to the unlock position. See your controller

documentation for whether or not it supports this feature and for the specific

procedure to accomplish this.

Specifications

Form-factor

No. of drive channels

Hot-swap drive tray

Cooling fan

Security locks

Host independent

720-0091-00 B

QUICK START GUIDE, 3W-RDC-400 Rev March 2003

5.25" x 3 standard half height drive bays internal mounting

4 each 1" trays

Yes

Page 3 of 4