フィットネス機器 Conquer 530-TRAINERのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Conquer 530-TRAINER 2 ページ。 Indoor bike trainer
ページを印刷するTrainer Setup for 26", 27" & 700C wheeled bikes w/
*Review and follow instructions prior to each use, and keep
instructions prior to each use, and keep with trainer for future reference.
*Use the product only as described in this manual.
only as described in this manual.
*Before each use, inspect the trainer and bicycle to ensure safety.
*Before each use, inspect the trainer and bicycle to ensure safety.
*Refer to the documentation for any questions. If you are unsure of use or have warranty
*Refer to the documentation for any questions. If you are unsure of use or have warranty
*Refer to the documentation for any questions. If you are unsure of use or have warranty
inquiries, please visit ConquerEquipment.com
inquiries, please visit ConquerEquipment.com
1. Remove all packaging, unfold the frame, and place on a level floor.
1. Remove all packaging, unfold the frame, and place on a level floor.
2. Replace your bicycle's rear wheel quick
2. Replace your bicycle's rear wheel quick-release skewer with the skewer included with
your trainer. This is to make your bike fit the trainer properly, for stability and for safety.
your trainer. This is to make your bike fit the trainer properly, for stability and for safety.
your trainer. This is to make your bike fit the trainer properly, for stability and for safety.
IMPORTANT: Before placing your bike in the trainer, rotate the right side hub
IMPORTANT: Before placing your bike in the trainer, rotate the right side hub-clamp D
IMPORTANT: Before placing your bike in the trainer, rotate the right side hub
and release the wing nut A or adjust the wing nut B on the left side to create a wide
and release the wing nut A or adjust the wing nut B on the left side to create a wide
and release the wing nut A or adjust the wing nut B on the left side to create a wide
enough clearance in between the couplings.
enough clearance in between the couplings.
3. Install the bike's rear hub between th
3. Install the bike's rear hub between the couplings, and adjust wing nuts C and A to lock
the rear hub. Then adjust wing nut B to lock against the trainer. DO NOT
the rear hub. Then adjust wing nut B to lock against the trainer. DO NOT
OVERTIGHTEN.
EMAIL:
, 27" & 700C wheeled bikes w/Quick Release
release skewer with the skewer included with
e couplings, and adjust wing nuts C and A to lock
WEB: help.conquerequipment.com
Product name: Conquer Indoor Bike Trainer
Conquer Indoor Bike Trainer
SKU: 530-TRAINER
EMAIL:
TEL: 855-349-4327
help.ConquerEquipment.com
Quick Release Wheels
trainer for future reference.
TEL: 855-349-4327
TEL: