エクササイズバイク Conquer 530-TRNTWHTのPDF クイック・スタート・ガイドをオンラインで閲覧またはダウンロードできます。Conquer 530-TRNTWHT 2 ページ。
ページを印刷するTrainer Setup for 26"
Trainer Setup for 26", 27" & 700C wheeled bikes
*Review and follow instructions prior to each use, and keep
instructions prior to each use, and keep with trainer for future reference.
*Use the product only as described in
*Use the product only as described in this manual.
*Before each use, inspect the trainer and bicycle to ensure safety.
*Before each use, inspect the trainer and bicycle to ensure safety.
*Refer to the documentation for any questions. If you are unsure of use or have warranty
*Refer to the documentation for any questions. If you are unsure of use or have warranty
*Refer to the documentation for any questions. If you are unsure of use or have warranty
inquiries, please visit ConquerEquipment.com
inquiries, please visit ConquerEquipment.com
1. Remove all packaging, unfold the frame, and place on a level floor.
packaging, unfold the frame, and place on a level floor. Twist plastic feet
(numbered 1-5) on ends of base to desired
5) on ends of base to desired level; adjust as necessary for uneven floor.
2. If bike does not have quick release skewer, proceed to step
If bike does not have quick release skewer, proceed to step 4.
3. If desired, replace your bicycle's rear wheel quick
eplace your bicycle's rear wheel quick-release skewer with the skewer
included with the trainer.
4. IMPORTANT: Before placing your bike in the trainer, rotate the
IMPORTANT: Before placing your bike in the trainer, rotate the couplings
wing nut A or adjust the wing nut B on the left side to create a wide enough clearance in
A or adjust the wing nut B on the left side to create a wide enough clearance in
A or adjust the wing nut B on the left side to create a wide enough clearance in
between the couplings. Install the bike's rear hub between the couplings, and adjust wing
nuts A and D to lock the rear hub. Then adjust wing nut B
to lock the rear hub. Then adjust wing nut B and C to lock against the
trainer. DO NOT OVERTIGHTEN.
trainer. DO NOT OVERTIGHTEN.
EMAIL:
, 27" & 700C wheeled bikes
Install the bike's rear hub between the couplings, and adjust wing
Install the bike's rear hub between the couplings, and adjust wing
Twist plastic feet on base
of frame (if necessary) to
level unit on uneven
floors.
WEB: help.conquerequipment.com
Product name: Conquer Indoor Bike Trainer
Conquer Indoor Bike Trainer
SKU: 530-TRNTWHT
EMAIL:
TEL: 855-349-4327
help.ConquerEquipment.com
trainer for future reference.
adjust as necessary for uneven floor.
release skewer with the skewer
couplings and release
lock against the
Twist plastic feet
TEL: 855-349-4327
TEL: