スピーカー Conquer Industry CQL1806-BのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Conquer Industry CQL1806-B 2 ページ。 Wireless diffuser speaker
ページを印刷する
Power:
Insert the small connector of the supplied micro-USB power cable into the USB power port on the back of
the speaker.
Insert the large connector into the USB port on a computer or a 5V USB adapter (not included) and plug
into a wall socket
The LED indicator will turn red when the speaker is connected to a power source.
1. LED Power Indicator
2. Fan/LED power Switch
3. Bluetooth Power Switch
Playing Music via Bluetooth
Turn your Bluetooth speaker on by sliding the power switch located on the back of the speaker to the ON
position to activate the Bluetooth function.
A tone will be heard to indicate the speaker entering pairing mode and searching for your Bluetooth device.
Make sure the Bluetooth function on your device is turned on.
Search the speaker named "XXX".
Once you have selected the speaker, your device will pair without a password. (If your device prompts for a
password, enter the password"0000".)
Start playing music on your device. Make sure that you keep your device within a 33 feet range of your
Bluetooth speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in use.
Light Operation
Push the Fan/LED power switch to the "ON" position
The LED light will light up and cycle through difference colors automatically
Turn the Fan/LED switch to "OFF" position to turn off the light
Using as A Diffuser
Remove the cover from the top
CQL1806-B Wireless Diffuser Speaker
Instruction Manual (Read before proceeding)