ページを印刷する
4. Installation
Before starting:
Check the scope of delivery and ascertain that the Speed Dome is not damaged.
Never hold the Speed Dome by its waterproof cable, as otherwise its water retardant properties
could be compromised.
4.1 Installation on the wall
1. Undo both the locking screws on the side of the Speed Dome and then open the dome.
2. Remove the lens protector, the foam and the adhesive strips from the dome.
Lens protector
Foam
3. Close the housing and fasten both locking screws in place.
23
English
Locking screw
Adhesive strips