- ページ 13

ソナー Daniamant Echopilot FLS 3DのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Daniamant Echopilot FLS 3D 17 ページ。 Forward looking sonar

Industrivej 24C

DK-3550 Slangerup

Denmark

FLS 3D

Tel. +45 4737 3800

Fax: +45 4737 3809

www.daniamant.com

Keypad Installation

The waterproof keypad plugs into the visual processor as explained on the previous page.

The keypad should be mounted as near as possible to the display which the EchoPilot 3D is being

shown.

The keypad has been designed for panel mounting. It is provided with a stainless-steel mounting

bracket, two plastic m6 studs and two m6 plastic nuts.

Once you have decided on the best position for the keypad (making sure that the cable reaches

the visual processor), cut out a rectangular hole measuring 103mm x 161mm. Place the keypad

into the cut out with the m6 studs already screwed into the threaded holes in the back of the

keypad (you may also wish to seal with a small amount of suitable sealant). Place the stainless-

steel bracket on the studs and tighten with the plastic nuts. Do not over tighten the mounting nuts.

FLS 3D Manual Version 1

Daniamant A/S