- ページ 6

アンプ Audiolab 6000A PlayのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Audiolab 6000A Play 17 ページ。
Audiolab 6000A Play にも：ユーザー・インストラクション (12 ページ), ユーザーマニュアル (12 ページ)

ページを印刷する

Important Safety

Getting Started Controls and Connectors Remote Handset

Information

5: Connections

Analogue Inputs (Line Level)

Connect your analogue sources to one of the three line level

inputs, AUX1, AUX2 or AUX3.

Phono Input (MM)

Connect your Turntable (Moving Magnet cartridge) to the PHONO

Input. Connect the Earth lead from your Turntable (if available) to

the GROUND terminal.

Coaxial digital Inputs

Connect your coaxial digital sources to either DIG1 or DIG2.

Optical digital Inputs

Connect your Optical digital sources to either OPT1 or OPT2.

Pre-Amplifier Output

Pre-amplifier output for driving external power amplifiers, sub-

woofers or signal processors.

Loudspeaker Terminals

One set of Loudspeaker output terminals.

Headphone Output

A stereo 6.3mm (1/4") jack is provided on the front panel for

connecting Headphones.

When Headphones are connected the audio to the loudspeakers

terminals will be cut off.

Bluetooth Connection

Select BT source on the 6000A, on your mobile device search for

'Audiolab 6000A BT' and connect.

Connections

Operation Warranty Coverage Specifications

Once paired the front panel SOURCE indicator will be turned on. If you switch to another

input on the 6000A your mobile device will be disconnected after 60 sec. To reconnect,

select BT on the 6000A and it will connect to the last paired device, or select 'Audiolab

6000A BT' on your mobile device in the Bluetooth menu and it will reconnect.

12V Trigger Connections

The 6000A features two 12V Trigger connections, one output and one input. Use

the output to control other products (ie. Audiolab amplifiers or 3rd party compatible

equipment). Use the input when the 6000A is to be controlled (ie. by Audiolab

6000CDT, or 3rd party compatible equipment).

The Trigger connections are made using 3.5mm to 3.5mm jack interconnects (not

incl.).

Mains Input

Before connecting the 6000A to the mains supply make sure all other

connections to your system have been properly and securely made.

Make sure the ON/OFF switch on the rear of the unit is switched off.

Now connect the supplied mains cable to the AC supply outlet.

Page 5

OUT