- ページ 5
メディア・コンバーター Audiolab 6000N PlayのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Audiolab 6000N Play 20 ページ。
ページを印刷する
4: Controls and functions - 1
1
4
5
6
7
2
8
9
10
11
12 13
14
15
1.Indicators
Device States
Standby Mode
Initialization Mode
Standard Setting Mode
WPS Mode
Network Connecting
WiFi Network Connection
Wired Network Connection
2.The PRESET Button
Store/Play Internet Radio Stations - up to 6 Stations can be stored.
To store a station, press and hold a Preset button for 3 seconds. The LED
3
will double-flash once to show it is stored. If it fails to store the LED will
double-flash three times.
To Play a Station, press a Preset button briefly. The LED will double-flash
once.
Failure to play a station will be signaled by the LED double-flashing 3
times.
Combination key function：
Factory Reset
Press and hold Preset button "1" and "4" for 8 seconds, the red LED will
flash twice with a tone, then the device will restart automatically.
Analogue Output Level Setting
Press and hold Preset button "2" and "5" for 3 seconds, the analogue
output level can be switched between fixed and variable.
When set to fixed mode, the red LED on the front panel will flash thrice,
the analogue output level will be fixed to the maximum output.
When set to variable mode, the red LED on the front panel will flash twice,
then the analogue output level can be adjusted by APP. The default setting
on 6000N Play is variable mode.
Page 5
LED States
LED is dark red
LED fast-flash white
LED slow-breathe white
LED double-flash white
LED slow-flash white
LED is bright white
LED is bright red