- ページ 12

録音機器 Brainworx bx_controlのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brainworx bx_control 17 ページ。 Control listening and monitoring instrument. m/s matrix with mono maker and stereo width control. for scope systems

ページを印刷する

ROUTING for M/S RECORDINGS:

the M microphone(s) shall be routed into the LEFT input of the

bx_control.

the S-mic goes straight into the RIGHT input of the bx_control.

INPUT & OUTPUT SWITCHES for M/S RECORDINGS:

definitely switch the INPUT SWITCH to M/S!

set the OUTPUT SWITCH to L/R if you want to output a "regular"

LEFT / RIGHT stereo signal.

Set the OUTPUT SWITCH to M/S as well if you want to go on

processing your signals in M/S mode (that is possible with ANY

additional stereo plugin chained after the bx_control!) before

converting to L/R with a second instance of the bx_control at a later

stage in your signal flow.

6.b. using the bx_control on various elements of your MIX

SESSION:

The bx_control is a GREAT tool to control the multiple elements that a

stereo mix usually contains of:

try it in SUB-GROUPS (AUX INPUTS, etc.) for controlling STEREO

WIDTH of:

o guitar groups

o keyboard groups

o FX returns, etc.

SPREAD the stereo image of only SOME parts of your mix without

affecting the phase correlation on the WHOLE mix.

ROUTING in MIX SITUATIONS:

simply INSERT the bx_control into any INSERT SLOT of your host

program and most likely run it in "L/R in – L/R out" – mode.

INPUT & OUTPUT SWITCHES in MIX SESSIONS:

switch both SWITCHES (IN & OUT) to L/R

the controls (STEREO WIDTH, BALANCE, MONO MAKER) will STILL

operate using M/S technique.

No need to worry about anything at all... just monitor the PHASE

CORRELATION METER LEDs and BALANCE METER LEDs, use the

MONO MAKER to make sure you´re not overdoing the STEREO

IMAGING... and ENJOY! ☺