- ページ 7

録音機器 Brainworx bx_controlのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brainworx bx_control 17 ページ。 Control listening and monitoring instrument. m/s matrix with mono maker and stereo width control. for scope systems

ページを印刷する

3. SOLO buttons

with these SOLO buttons you can listen to any element of your

stereo mix (stereo signal), mono-ed out (for L, R, M & S) and

phase-corrected (for SOLO S only), and on BOTH SPEAKERS.

You can also "extract" certain elements of your mix with these

knobs easily, for example try recording or bouncing the SOLO S

signal for REMIX purposes... which will give you a phase-corrected

mono-signal of only the stereo information (keyboards, stereo,

guitars, FX sounds, etc.)!!!

4. BALANCE CONTROL

with this knob you can "tilt" the whole stereo image conveniently.

to balance out a stereo mix perfectly you can monitor the

BALANCE METER LEDs (see 8!) and adjust the BALANCE

CONTROL knob until your mix is CENTERED.

most mixes that come from ANALOGUE MIX CONSOLES or

went through analogue outboard equipment (compressors,

EQs, etc.) are NOT balanced perfectly. With the bx_control

and its BALANCE CONTROL knob (plus the corresponding LED

meters, see 8) you can easily fix that.

the easiest way to "center" a mix is to listen to SOLO S

while adjusting the BALANCE CONTROL. When all parts of the

mix that are supposed to be centered (bass-drum, bass, lead

vocals, etc.) are NOT audible during SOLO S your mix IS

centered properly!