- ページ 4

屋外用家具 Dura Trel 11125のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Dura Trel 11125 5 ページ。 6' bench

Insert one 15¾" leg (part 2) into bracket. Place second 15¾" leg (part 2) on inside of bracket and loosely fasten

with 4" bolts, washers and nuts. Set 24¾" diagonal brace on inside of legs with ¼" drilled hole against legs.

Using one 4" bolt, washers and nut, fasten diagonal brace to legs. When inserting bolt, place TWO washers in

between legs. Tighten all bolts.

Repeat for opposite end of bench.

In center of seat, overlap free ends of diagonal braces and drill two ⅛" holes through braces and into center

brace. Using two 2" screws, fasten both diagonal braces to center brace.

Apply glue to inside edges of 11⅛" seat end cap (part 6). Press end cap onto ends of seat (DO NOT slide from

end). Take care that end cap is flush with ends of seat and use a file to round off any sharp edges. Apply glue

to inside edges of 6" leg end cap (part 7). Press end cap onto bottoms of legs(DO NOT slide from end).

6' Bench