- ページ 5

電話 AUDIOLINE SENSOR 500のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AUDIOLINE SENSOR 500 19 ページ。 Audioline sensor 500 initial setup
AUDIOLINE SENSOR 500 にも：マニュアル (1 ページ), 初期設定マニュアル (1 ページ)

ページを印刷する

CONNECTION TO THE TELEPHONE NETWORK

· Connect the curly cord to the left-hand side of the telephone and to the

bottom of the handset.

· Connet the power cord to middle socket of telephone and plug into power

outlet.

· Connect the telephone line cord to the socket entitled "LINE" on the rear of

the telephone and then connect the cord to the network wall outlet. The

display will show: NO CALLS.

Headset socket

To connect headset, see page 4.

Do not place the unit in direct sunlight or in an area of high humidity.

In very rare situations the rubber feet on the base of the telephone may discolour

a surface.

It is recommended that you disconnect the base unit from the mains power dur-

ing a thunderstorm.

Do not use in the rain, near a bath or with wet hands.

To clean the product, use a damp cloth or antistatic wipe. Never spray cleaner

fluid directly onto the handset or base unit.

Line

Plug pack power

Line cord socket