- ページ 10

バイクアクセサリー Brake Free Smart Brake LED LightのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brake Free Smart Brake LED Light 11 ページ。 For helmet

VII.

Brake Free Technical Specifications

Battery info: 2950 mAh Samsung Li-Ion

Riding time: 8-12 hours depending on riding conditions and light mode

Operating temperature range: -20°C to 60°C (-4°F to 140°F)

Charging temperature range: 0°C to 45°C (32°F - 113°F)

Charging Port: Micro USB charging (5V)

Charging Rate: 1 Amp Max

Lights: 100 LEDs;

Weight: 200 grams

Dimensions: 184mm wide, 84mm tall, 30-40mm thick

Water resistance: IP64

Mount Adhesive: high-performance 3M VHB double-sided adhesive

VIII.

*Warning*

Explosion hazard if the battery is replaced by an incorrect type of battery. The battery

included with Brake Free should only be replaced by Brake Free Technologies, Inc. or

by an authorized service center.

● Do not attempt to replace your Brake Free battery. It is a sealed unit, and the

battery is not user replaceable.

● Charge the battery per instructions provided in this manual

● Attempting to open your Brake Free unit, replacing the battery, or modifying the

unit in any way will void the warranty. In addition, the materials contained in the

battery could harm the environment or cause personal injury if mishandled or

disposed of improperly.

● Please do not expose your Brake Free to extreme temperature conditions. Refer

to the Technical Specifications section above for proper operating conditions.

● Do not charge your Brake Free if wet.

● Do not clean your Brake Free or its accessories with abrasive chemicals.

● Do not throw your Brake Free into the fire or keep near a heating source. It is an

explosion hazard.

● Do not throw away your Brake Free with your household trash as it contains a Li-

Ion Battery. Please recycle your Brake Free with the proper local electronics

recycling facility.

120°

viewing angle