- ページ 4

ソフトウェア 3Ware 9690SA SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3Ware 9690SA Series 11 ページ。 Remote battery board
3Ware 9690SA Series にも：インストレーション・マニュアル (4 ページ)

ページを印刷する

Creating RAID Units

Related Documentation

The following additional documentation is available:

•

The installation guide that came with your 3ware RAID controller tells

you how to physically install a 9690SA or 9650SE controller and the

BBU (battery backup unit).

•

3ware SAS/SATA RAID Software User Guide provides general

information about using the 3ware RAID controller and the 3ware RAID

management software utilities 3BM (3ware BIOS Manager) and 3DM2

(3ware Disk Manager).

Notes:

3DM2 is not yet supported for OpenSolaris.

Primary storage is not yet supported for OpenSolaris.

•

3ware SAS/SATA RAID Controller CLI Guide provides information on

using the 3ware Command Line Interface (CLI).

These guides are available in PDF format in the /doc folder of the CD you

create from the downloaded CD image. They can also be downloaded

individually from the 3ware website at

http://www.3ware.com/support/userdocs.asp.

Additional support information is available in the 3ware Knowledgebase, at

this website:

http://www.3ware.com/KB

You can create one or more RAID units either before or after you install the

software.

To create a RAID unit or units

Install your 3ware RAID controller as described in the installation guide

for the controller. You can download an electronic version from

http://3ware.com/support/userdocs.asp.

Use 3BM (3ware BIOS Manager) to create one or more RAID units on

the 3ware RAID controller. You can access 3BM by pressing Alt-3 during

system startup.

Instructions for creating units using 3BM are available in Chapter 3,

"First-Time RAID Configuration Using 3BM" in the 3ware SAS/SATA

RAID Software User Guide.

You can also use the CLI to create RAID units. For details, see the 3ware

SAS/SATA RAID Controller CLI Guide.

3ware® SAS/SATA RAID Software User Guide Addendum for OpenSolaris