- ページ 7

ベビーモニター AUDIOLINE Watch&Care V132のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AUDIOLINE Watch&Care V132 12 ページ。 2.4ghz babyphone

Putting the unit into operation

Connecting and aligning the transmitter

Attention: Position the transmitter with a minimum distance of

1 m to other electronic devices, otherwise there is a risk of mutual

disturbance. Point the upper section of the transmitter towards the

baby or object you want to monitor. Check that the baby or object is

suitably displayed on the receiver.

Operating with batteries (not supplied)

Use a small screwdriver to open

the transmitter's battery compartment on

the underside. Insert the batteries, pay-

ing attention to correct polarity. Refer to

the diagrams in the battery compartment.

Close the battery compartment again.

The transmitter is operated by means of 4 AAA Alkaline batteries

(not contained in the material supplied). The transmitter cannot be

charged. Insert the batteries before connecting the power adapter

plug.

In the case of a low battery charge, the Power LED flashes slowly.

The batteries must be replaced.