- ページ 7
会議システム Danish Interpretation Systems DCS 600のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Danish Interpretation Systems DCS 600 18 ページ。 Digital conference system audio output unit with firmware 5.3.5 or later
ページを印刷するDanish Interpretation Systems
Operating instructions
AO 6008 Audio Output Unit
General description
The AO 6008 Audio Output Unit for the DCS 6000
system enables the user to record the sound from a
number of interpreted language channels or floor
channel on external devices such as tape- or hard
disk recorders by analogue interface.
It can also be used to distribute sound channels to
for example infrared distribution or loudspeaker
system.
Features
Decoding of 8 language channels into analogue
audio chosen out of the possible 31 digital
channels as well as the Floor channel in 3
qualities.
The 8 decoded channels are available on 8
analogue outputs (XLR connectors).
A number of AO 6008 can be combined to
decode more channels. Up to 20 pieces AO
6008 can be connected and configured in one
system to decode more channels.
User control of the AO 6008 by using the
buttons and display on the front or by sending
commands and reading status from a PC via CU
6010.
The unit is connected to the bus as any other
unit and by controlling it from the CU 6010 it
can be placed anywhere in the system.
The user can set up the desired languages and
volume settings, read error status, load/save
settings and view information about the unit.
A headphone connector on the front of the unit
enables the user to check the sound from the
analogue outputs. The sound is routed from the
XLR connectors through an analogue switch to
the headphones.
Manual 01 18 04440
User Manual
7