- ページ 3

バッテリーチャージャー Conrad Electronic 1424765のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Conrad Electronic 1424765 8 ページ。 Usb charger, industrial-grade aluminium

ページを印刷する

Operating instructions

IPS-5000/4 USB charger, industrial-grade

aluminium

Item no. 1424765

Intended use

This product is designed to charge several USB devices at the same time. It can charge up to 4

mobile devices (tablets or smartphones) with a charging current of 2.4 A per port. The charging

station can be fixed to a solid surface. The smart charge feature automatically determines the

necessary charging current for the connected device(s) and adjusts the current accordingly.

Do not connect any devices that cannot be charged. Power is supplied via the power adapter

provided with the product. Connect the power adapter to a standard mains socket connected

to the public grid.

It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in

bathrooms, must be avoided under all circumstances.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you

use the product for purposes other than those described above, the product may be damaged.

In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.

Read the instructions carefully and keep them. Make this product available to third parties only

together with its operating instructions.

This product complies with the statutory national and European requirements. All company

Delivery content

• Charger

• Power adapter

• Mains cable

• Operating instructions

Up-to-date Operating Instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code

above. Follow the instructions on the website.

Meaning of symbols

The symbol with the lightning in the triangle is used if there is a risk to your

health, e.g. due to an electric shock.

The exclamation mark indicates specific risks associated with handling,

function and use.

The "arrow" symbol indicates special tips and operating information.

The product must only be installed and used in dry, enclosed indoor areas.

The product must not become damp or wet, otherwise it may generate a

fatal electric shock!

This symbol indicates that this product is built according to protection class

II. It is equipped with reinforced or dual insulation between the mains circuit

and the output voltage.

Safety instructions

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information

on proper handling in this manual, we assume no liability for any resulting

personal injury or damage to property. Such cases will invalidate the warranty/

guarantee.

a) General information

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become

dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high

humidity, moisture, flammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and

protect it from any accidental use. Safe operation can no longer be guaranteed

if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height

can damage the product.

• Also observe the safety and operating instructions of any other devices which are

connected to the product.

• Consult an expert when in doubt about operation, safety or connection of the

device.

• Maintenance, modifications and repairs are to be performed exclusively by an

expert or at a qualified shop.

• If you have questions which remain unanswered by these operating instructions,

contact our technical support service or other technical personnel.

b) Persons and Product

• The mains outlet must be located near to the device and be easily accessible.

• As power supply, only use the supplied mains adapter.

• Only connect the power adapter to a normal mains socket connected to the public

supply. Before plugging in the power adapter, check whether the voltage stated on

the power adapter complies with the voltage of your electricity supplier.

• Never connect or disconnect power adapters if your hands are wet.

• Never unplug the power adapter from the mains socket by pulling on the cable;

always use the grips on the plug.

• When setting up the product, make sure that the cable is not pinched, kinked or

damaged by sharp edges.

• Always lay the cables so that nobody can trip over or become entangled in them.

This poses a risk of injury.

• For safety reasons, disconnect the power adapter from the mains socket during

storms.

• The power adapter is constructed according to protection class II.

• Never use the product immediately after it has been brought from a cold room into

a warm one. The condensation generated could destroy the product. The plug-in

power supply unit also involves danger to life by electric shock! Allow the product

to reach room temperature before connecting it to the power supply and putting it

to use. This may take several hours.

• If the wall plug transformer is damaged, do not touch it; there is danger to life from

electric shock! First, switch off the mains voltage to the mains socket to which the

wall plug transformer is connected (switch off at the corresponding circuit breaker

or remove the safety fuse, then switch off at the corresponding RCD protective

switch, so that all poles of the mains socket are disconnected). You can then

unplug the wall plug transformer from the mains socket. Dispose of the faulty

wall plug transformer in an environmentally friendly way; do not use it any more.

Replace it with a wall plug transformer of the same design.

• Never pour any liquids over electrical devices or put objects filled with liquid

right next to the device. If liquid or an object enters the interior of the device

nevertheless, first power down the respective socket (e.g. switch off circuit

breaker) and then pull the mains plug from the mains socket. Do not operate the

product anymore afterwards, but take it to a specialist workshop.

• Do not use any force when connecting USB plugs. A USB plug can only be

inserted into a USB port in one orientation.

• Do not cover any of the ventilation grilles to ensure that the appliance can cool

properly.

• The device housing must not be covered! The device housing warms up during

use. Ensure that there is sufficient ventilation.

• Do not drill any holes into the product housing.

• Do not mount the product in vehicles.

Operating elements

1 Mounting holes (on both sides)

2 USB-A outputs

3 LED indicator

4 ON/OFF button

5 DC IN: 12 V low voltage power in socket