- ページ 8

アンプ Audionet AMP II MAXのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Audionet AMP II MAX 13 ページ。
Audionet AMP II MAX にも：オーナーズマニュアル (13 ページ)

Programming

Overview

Except the previous described feature of countdown timer controlled

automatic power on your AMP II MAX can be setup to your preferences

by menu selections. The settings will last after switching off the AMP II

MAX. Changing settings has to be done while the amplifier is switched

on and in operating mode.

List of settings to be adjusted to your preferences:

· Brightness of display (default: 50% brightness).

· Display mode: Selected input, temperature, peak-level meter.

· Input selection: Cinch or balanced (XLR) input.

· Auto-On: Threshold for level controlled automatic power on (see

above).

· Auto-Off: Time to automatic power down (see above).

· Choose between two texts to be displayed in stand by mode.

Operating

To change settings use short or long key presses on the "power" button at

the front of the AMP II MAX. Switch on your AMP II MAX and hold the

button pressed for at least 2 seconds to enter the menu.

For further operating please consult the graphic below. A long key press

will enter a menu or sub-menu. Use short key presses to move along the

menu options.

To save the changed settings use a long key press or wait for at least 10

seconds. For further changes to the settings re-enter the menu as de-

scribed above.