- ページ 3

アンプ Audionet PRE I G2のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Audionet PRE I G2 15 ページ。 Stereo – pre - amplifier

Connecting the system

Power supply

Please connect the power jack (1) at the rear with your wall outlet (Please

refer to page 8). Use the provided power cable or another one allowed for

your home country specifications.

NOTE:

The power specifications (2) on the rear must meet to your home

country specifications.

The mains-button (3) at rear must be switched off. The PRE 1 G2 is

a Class I system and must be earthed. Please ensure that the earth-

connection is in best condition. For best performance connect the hot

wire seeing from the front with the left pin.

Ground Connection

With the PRE 1 G2 comes a yellow-green ground cord for optimal

ground connection. Please connect this additional ground cord to the plug

(10) at the back of the PRE 1 G2 and put the plug into a socket near to

the power cord.

Audio sources

The Audionet PRE 1 G2 is a very sensitive system. Please ensure that all

used connector cables are in absolutely best condition.

For connecting or removing audio sources, PRE 1 G2 has to be switched

off (stand by-state) or must be muted.

Inputs

The Audionet PRE 1 G2 has one balanced and five unbalanced high level

RCA inputs (4). Additionally, a true monitor loop is available. Please con-

nect left and right inputs to the corresponding outputs of the designated

high-level source.