- ページ 6

浄水器 Danner PONDMASTER HAMPTON CPF1000UのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Danner PONDMASTER HAMPTON CPF1000U 11 ページ。 Pressurized filter system

SET UP FILTER MEDIA

Unpack the Main filter unit. Open the cover by pulling latches out at bottom then

pivoting them outward at the top. Then pull straight up on cover.

If your filter includes the UV Clarifier, carefully lift the cover and check that UV bulb

is connected to the fixture inside the quartz sleeve. If it has become dislodged

during shipping see separate sheet included with UV units

for instructions to access bulb. Carefully place the cover

aside.

Debris Filter Media Pad fits into the top tray.

BioMatrix filter ball media is used in the bottom tray or trays

depending on your model. If your BioMatrix filter ball media

is packed in plastic bags, empty them evenly into the

bottom tray(s) and dispose of the bags.

When finished, replace cover

paying careful attention to

align intake / outlet ports with

molded handle in filter drum.

Close latches - - Clip tops first

then press bottoms inward.

INTAKE

and

OUTLET

MOLDED

HANDLE

HOSE ASSEMBLY

Connect hoses from pump

and to water return as

shown using stainless steel

hose clamps (not supplied).

We recommend using an

in-line check valve before

the pump connection.

TEST FILTER SET-UP

Once hoses are connected, the filter should be checked with the pump

running. Check that hoses are supported well enough to avoid

stressing the plastic intake and outlet ports once they are weighted

with water during operation. Supporting the hoses will help prevent

kinked tubing. Check for leaks and tighten hose clamps if needed.

OUT

FROM

PUMP

POND