- ページ 4

バリカン Dannyco BaByliss PRO AceのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dannyco BaByliss PRO Ace 10 ページ。 Professional rotary motor clipper

ページを印刷する

STORAGE:

when not in use, your appliance is easy to store. allow appliance to cool, then

store out of reach of children in a safe, dry location. Do not jerk or strain cord

at plug connections.

USER MAINTENANCE INSTRUCTIONS

MAINTENANCE OF THE BLADES

Always apply oil to the blades before and after use. This will ensure maximum

cutting performance. Hold clipper away from your body in a downward position

and apply oil on the front and sides of the cutter blade. Wipe off excess oil with

a soft dry cloth.

SHARPENING/REPLACEMENT OF BAB840C BLADE SET

To maintain optimal performance, the blades should

be cleaned and oiled regularly. The blades of the

BabylissPro clipper are removable for easy cleaning. Set

the blades in the longest length cutting position. Hold

the clipper with the blade frame pointing up and push

up to slide the blade frame out.

Remove hair from the blades using the cleaning brush.

Oil the blades with the oil provided with the clippers.

(Fig. 1)

Never use any other product; the oil provided is specially

formulated for clippers and won't evaporate or slow the blades down. After

cleaning, replace the blade set by snapping back into place.

Any other servicing should be performed by an authorized service

representative since the appliance has no other user-serviceable parts. The

product is for professional use.

Do not pull, twist, or wrap line cord around appliance.

BAB840C IB-12_030A.indd 7-8

HOW TO USE CUTTING GUIDES

To use the cutting guides, turn the clipper to the OFF position.

Slide the cutting guide onto the top of the clipper blades, and

then pull down and over the back of the blade set (Fig. 2). To

remove, pull up on the back of the cutting guide and then pull

away from the blades.

BabylissPro cutting blades are ground from the finest quality steel and are

hardened to extend the cutting performance. As with any cutting appliance,

the blades' cutting edges will become dull from repeated usage. Increasing

blade tension to force blades to cut can cause the clipper to overheat and

reduce motor life. When the cutting blades no longer cut smoothly, sharpening

or replacement is required.

ADJUSTABLE TAPER LEVER

The taper lever is positioned at your thumb. You can hold the clipper in your

hand and adjust the lever at the same time – while you are clipping.

The taper lever adjusts the closeness of the cut from a close cut with the taper

lever in the UP position, to a longer-length cut with the taper lever in the DOWN

position. To increase cutting length, slowly push the lever down. To cut closer,

push the lever up. Because a different cutting edge is used in each setting,

using the taper lever lengthens the life of your blades.

Packed-in hair can slow down any clipper. To remove hair without removing

the blades, keep the clipper on and quickly push

the taper lever back and forth from "close" to

"longer" cut several times. If you do this every

time, especially after heavy hair cutting, the

blades should remain free of cut hair.

(Fig. 2)

2/2/15 2:05 PM