- ページ 5

録音機器 audiophony CP2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。audiophony CP2 12 ページ。 Stereo compressor/limiter/gate

ENGLISH

3 - Main characteristics

Stereo Compressor/Limiter/Gate with Link and Side Chain functions - 19" edge-rackable.

The CP2 is a professional tool allowing you to modify the dynamic of one stereo sound signal, or two mono signals.

The Gate section allows you to suppress the parasitic and background noises by preventing any signal lower than

the determined threshold to go through the audio circuit.

The Compressor section allows you to modify the signal dynamic in order to optimise its rendering or mitigate its

peaks.

The Limiter section allows you to prevent the incoming signal from going beyond a certain threshold once processed

in order to protect your speakers from the damages of an excessive volume output.

• XLR or Jack 6.35 unbalanced/balanced inputs and outputs, settings: +4/-10 dB

• Side Chain system allowing a perfect dynamic weighting per frequency (requires an optional equalizer)

• Gate:

• Threshold settings from 0 to +15 dBu

• Release time settings

• Weighting per frequency (requires an external equalizer)

•Compressor:

• Threshold settings from -40 to +20 dBu

• Ratio: from 1/1 to infinite/1

• 2 compression modes: Hard Knee and Soft Comp

• Attack and release settings in auto or manual mode

• Adjustable output level

• Limiter:

• Threshold settings from 0 to +20 dBu

4 - Peparation and installation

4.1 - Checking the contents

The package must contain the following articles:

- The CP2

- The user guide

- 1 power cord

4-2 - Installing the unit

a - Set up the CP2 over a flat surface or within racks.

b - Please make sure the unit is installed in a properly ventilated place, unexposed to sunlight rays, excessive

temperatures or humidity.

Page 6

CP2 - Stereo Compressor/Limiter/Gate