ストレージ Addonics Technologies RCHDSAESのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies RCHDSAES 4 ページ。 Ruby combo hard drive

Addonics

T E C H N O L O G I E S

Ruby Combo Hard Drive

RCHDSAES & RCHDSAEU

User's Guide

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a class B digital

device pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy. If not installed and

used in accordance with the instructions, it may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user

is encouraged to try and correct the interference by one or more of the following

suggestions.

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver

Connect the equipment to a different power outlet other than the one where receiver is

connected

Consult a certified television or radio technician

Version 1.0

Enclosure Overview

2.5" SATA

hard drive

Step 1 Separate the top from the bottom cover of the drive enclosure by

loosening the screw as shown on the photo.

Step 2 Align the SATA connector in the 2.5" hard drive with the SATA connector

on the PCB.

Step 3 Wrap the shock absorbers around the hard drive and PCB.

top cover

shock

absorbers

switch

PCB

bottom cover