- ページ 4

ターンテーブル Consonance ISOLDE MKIIIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Consonance ISOLDE MKIII 6 ページ。

5. From lift to right is: 33/45 speed selection switch, speed adjustment knob,

power on/off switch. Put the Strobe Disc on the platter, and adjust the speed

controller knob to get the 33.3rpm or 45rpm. The corresponding circle on Strobe

Disc will display stable stripes.

6. Install the cartridge and make sure the overhang is 17.5mm. Install the

counterweight, rotate, set the tracking force according to the needle pressure

gauge. Hang up Anti-skate weight according to the tracking force.

7. Use the wrench to loosen the screw on the side of the armbase to adjust the

VTA. After the adjustment is completed, re-tighten the screw.