- ページ 8

計測機器 Consonics CyberTek QualifierのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Consonics CyberTek Qualifier 19 ページ。

Qualifier Supplement

Manual – The user can set a threshold between 2-22 dBmV using the F3 Key and the arrow

keys.

F2 Key (Automatic Reset)

This key will reset the Automatic Threshold

back to the factory default and reinitialize the

rolling average.

F3 Key (Manual)

This key will display the current manual

threshold (initialized at the factory at 12

dBmV). The user can then use the Arrow keys

(< or >) to change the value. The range of values are between 2-20 dBmV. Pressing the F6

key will take the unit back into the Main Qualifier Mode.

F4 Key (RUID)

Pressing this key will allow the user to set the Receiver User Identifier (RUID). The current

setting will be displayed. The user can then use the Arrow keys ( < or > ) to change the ID.

Valid ranges are 0-F. Pressing the F6 key will take the unit back into the Main Qualifier

Mode. Note: Qualifier and transmitters used in conjunction need to have the RUID

number match in order for the Qualifier functions to work properly.

F6 Key

Pressing this key will exit Qualifier Mode back

into normal operation. If the user was setting a

Manual threshold or the RUID, the unit goes

back to the main Qualifier Mode display.

d B