- ページ 11

防犯カメラ 3xLogic VX-2V-MD-RIWHのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。3xLogic VX-2V-MD-RIWH 20 ページ。 Visix v-series all-in-one camera gen ii

1. Route the cables and install the pendant mounting bracket. Secure the cap on the bracket.

2. Align the screw holes of the mounting base with the corresponding screw holes of the cap.

3. Secure the mounting base to the cap with screws.

4. Align the camera with the mounting base, and secure the camera with screws.

5. Connect the video output connector to the monitor and connect the power connector to the power supply

to adjust the surveillance angle and image.

6. Adjust the image and focus.

7. Install the dome cover back to the camera and tighten the lock screw to complete the installation.

12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

V-Series Camera Quick Start Guide | VX-2V-MD-RIWH

Pendant

Mounting Bracket

Cap

Install the Pendant Mounting Bracket

Cap

Mounting

Base

Install the Mounting Base

Secure the Camera