- ページ 8
アンプ Audioplex HD-100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Audioplex HD-100 17 ページ。 Reference amplifier
ページを印刷するREFERENCE AMPLIFIER
Rear Panel
Rear Panel
1
INPUT
CHANNEL 2
1. BALANCED INPUT CONNECTORS
Each input channel is equipped with a 1/4" TRS and an XLR connector. Standard rules of interconnect apply.
2. MODE SELECTOR SWITCH
Move this switch to select either the STEREO or BRIDGED MONO position as needed for the application.
The Stereo mode is most common. Channel 1 input feeds the channel 1 output. The channel 2 input feeds the
channel 2 output.
The Bridge Mono mode combines both channels to create one larger mono channel. Input signal applied to
channel 1 will be available across the positive terminals of Channel 1 and channel 2. Do not connect the
channel 2 input or any of the negative outputs.
3. OUTPUT CONNECTORS
Binding Posts and Locking speaker connectors are provided. Bridged Mono operation requires a different
method of connecting the cables than Stereo operation. Be sure than the amplifier is in the correct mode
before connecting the speaker load.
4. FUSE
The fuse protects the amplifier by opening the circuit for the AC mains power in case of overload or
malfunction. If the fuse opens, the amplifier (and the various other components in the system) should be checked
for proper operation. If the fuse continues to open after verifying that the system is wired correctly and that an
overload has not occurred, the amplifier should be checked for proper operation by a service technician.
5. AC INPUT
Connect this product to an appropriate AC power source using the supplied Universal AC Power Cord.
6
HD-100
2
TM
TECHNOLOGY
MODEL NO. HD-100
BALANCED
REFERENCE AMPLIFIER
0dBm
RATED OUTPUT 150W/CH @4 STEREO
RATED OUTPUT 300W @8 BRIDGED MONO
4
5
3
OUTPUT
CAUTION
CHANNEL 2
CHANNEL 1
TO REDUCE THE RISK
OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
TO REDUCE THE RISK OF
~
~
(4
8 )
(4
8 )
FIRE REPLACE ONLY WITH
SAME TYPE FUSE.
UTILISER UN FUSIBLE
DE RECHANGE DE
MEME TYPE.
~
~
(4
8 )
(4
8 )
BRIDGED
MONO
(8 ~16 )
INPUT
CHANNEL 1
BALANCED
0dBm