- ページ 17

セキュリティシステム Abus TVAC15000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Abus TVAC15000 20 ページ。

English

6.6 System settings

Use the ◄► buttons to switch the quad display

Quad Display = four-way display

on (ON) or off.

To activate quad mode, all the cameras have to

be activated.

When in quad display, you can use the arrow

buttons to switch directly to full-screen view for

individual cameras.

▲ = camera1;

▼ = camera2;

◄ = camera3;

► = camera4

Note that the cameras that are hidden are not

shown in the quad display.

Warning:

Only the full screen of the triggering channel

is recorded.

To record from all 4 cameras using motion

detection, quad display has to be activated.

Scan Period = dwell time for sequence display

You can define the dwell time for sequence

display here. Use the ◄► buttons to choose

between OFF/5 sec/10 sec/15 sec.

If you are not using cameras, hide them in order

to display only the occupied channel.

To switch off sequence display, press the

CH+/CH button. If you want to start manual

recording, press REC.

Warning:

Note that motion detection is only activated

for the channel that is currently displayed.

Press the ► button to switch between

Time Setting = Date/time settings

year/month/day/hours/minutes.

Use the ▲▼ buttons to change the values.

Confirm your input with OK.