- ページ 5

ストレージ Addonics Technologies ST45HPMXA-BのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies ST45HPMXA-B 8 ページ。 Storage tower

EZ Switch (SW1:2):

The EZ (spare) switch inhibits spares when ON. When in the OFF

position, all individual drives (not defined as members of an array) are

considered spare. Should a RAID become degraded, when the EZ

switch is in the OFF position a spare drive will be used automatically to

rebuild the RAID, if present. EZ mode is determined when the unit is

powered up. Changing the switch will have no effect until the unit has

been re-powered.

RAID Mode Switches M2, M1, M0 (SW1:3 – SW1-5)

The RAID Mode switches define what type of RAID will be initialized

when the unit is powered up while the RAID Mode button is held down.

Each type of RAID has different properties and requirements, as follows:

Raid Mode

JBOD (Individual

drives)

* FACTORY DEFAULT

SETTING

1 or 10

CLONE

LARGE

1 Audible alarm is recommended at all times.

2 EZ mode has no effect in JBOD mode.

3 Disabling EZ for RAID 0 and LARGE is strongly recommended.

JBOD Mode (Individual Drives)

Number of drives: at least 1

Unit capacity: N/A (100% of each individual drive)

Spares: no

Fault tolerance: none

JBOD mode offers all connected units to the host adapter, no RAID is

defined at all.

NOTE: JBOD mode requires a SATA controller featuring Port Multiplier support for eSATA

connections.

NOTE: Optical drives can only be configured as JBOD using an eSATA connection.

www.addonics.com

BZS

OFF

Technical Support (M-F 8:30am - 6:00pm PST)

OFF

Phone: 408-453-6212

Email: www.addonics.com/support/query/

OFF