- ページ 9

アンプ Constellation Altair IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Constellation Altair II 19 ページ。

6. USB / control

This USB jack is used to interface the Altair II with

third-party control systems such as those from AMX,

Crestron and Control4, and also to update the Altair II's

firmware. For more information, contact your dealer.

7. Trigger

This 3.5mm input jack allows the Altair II to turn a

connected device (such as a Constellation Audio

amplifier) on and off automatically. When the Altair II

is powered up or in Standby mode, this jack emits a 12-

volt DC signal. When the Altair II is powered off

entirely (by holding the front panel power button down

for 5 seconds), the jack emits no signal. This jack will

work with any device that can accept a standard 12-

volt trigger signal.