- ページ 18

クックトップ Casselin CPAI350ETのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Casselin CPAI350ET 18 ページ。 Sensor induction plate with thermostat timer

6.3 Safety instructions relating to maintenance

Daily check the state of your appliance: do not use it if it is damaged or if the power cord is damaged. If the

power cord is damaged it must be replaced by a professional electrician.

In case of break down contact your supplier.

Any intervention work on your appliance must be performed by a qualified professional.

Your appliance is provided with an overheating protection. When this protection has been activated you must

let your appliance cool down.

ADVICE

If overheating protection has been activated let your appliance cool down.

If your appliance does not start check the power cord.

The use of adaptors, multiple sockets and/or extensions is not recommended.

For any other anomaly contact your supplier.

ADVICE

Waste Electronic and Electric Equipment

To avoid any abuse and dangers and to fit the rules of the concerned countries before disposing of the used

appliance you must remove main electric cable.

ANOMALIE

ADVICE

These anomalies are indications. If you cannot solve the problem following these instructions, contact your

retailer.

CAUSES

> No pan on the plate or non-suitable

pan

> The temperature of the pan goes

up too much.

> Damaged part (ex. transistor).

> Overheating security goes on and

the appliance goes off.

> Short over voltage

EXPLICATION

> Change the pan for a suitable one

> Clean the ventilation opening let the

appliance cool down for few mn if the

message still contact your retailer.

> Contact your retailer.

> Putt the pan off the plate wait the

appliance cool down.

> Unplug the appliance wait the

appliance cool down