- ページ 6
キャッシュカウンター Cassida 5510のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cassida 5510 10 ページ。 Reliable bill counter for retail

1.5 Specifications
Counting speed
Detections
Hopper/stacker capacity
Display
Power consumption
Power source
Dimensions
Weight
1.6 Important safety notes
When using this product, basic safety precautions should always be taken, including
the following:
1.Do not use this product in areas where it may be exposed to water or any metal
parts.
2. Unplug this product from the wall outlet before cleaning. Use a damp cloth and
dont take it out with wet hands.
3. Put out the power cord taking it form the plug.
4. Only use the power cord supplied with the unit.
5. Carry out the unit only after powering it off.
6. If the unit was kept extended period of time in low temperatures, keep it in normal
temperature conditions at least 2 hour prior powering on.
In order to use the unit without technical support of engineers please follow below
rules:
1300 bills/min
UV, DD, SD (from 6 mm), HLF, CH
100/100 bills
LED, red (4 digits for number of
notes) and 3 (for batch number)
<80 Watts
220+/-10% V /50 Hz
295 õ 240 õ 175 mm
5 kgs
1. Make sure the device is installed on a flat surface.
2. This product is designed for indoor use in a ventilated environment. Keep the unit
away from direct sunlight and strong magnetic fields which could interfere with the
counterfeit detection sensor.
3. Do not operate the unit in areas with high dust humidity. High dust level may
prevent it proper operation.
2.
GETTING STARTED
2.1 Powering up
Please make sure the hopper is empty and turn the power switch on. The unit will
conduct a self-check by spinning the counting wheels several times. The screen will
display "0" when the unit is ready.
2.2 Loading the hopper
Loading the hopper correctly is important in order to avoid jams and speed up the
operation of the counter.
Proper hopper loading is shown in the following diagrams.
Adjust the gap with feeding gap adjustment screw based on thickness and condition of
bills.
Cassida 5510 Bill Counter