- ページ 4

コントローラー Aeware In.k200のPDF クイック・リファレンス・カードをオンラインで閲覧またはダウンロードできます。Aeware In.k200 4 ページ。 Compact full-function keypads for in.xe spa systems
Aeware In.k200 にも：マニュアル (12 ページ)

ページを印刷する

Water temperature regulation

In a regulation cycle, the system first

generates water flow through the heater

housing and the plumbing, in order

to ensure accurate water temperature

readings as well as avoiding heater

activation in dry conditions.

After verifying pump activation and taking a

water temperature reading if required, the

system automatically turns the heater on to

reach and maintain water temperature at

Set Point.

The "Heater" indicator lights up when

the heater is on. It flashes when there

is a request for more heat but the

heater has not yet started.

Troubleshooting

An internal hardware error has been detected in in.xe.

Contact dealer or service supplier.

The system has shut the heater down because the temperature at the heater

has reached 119°F (48°C). Do not enter the water! Remove the spa cover and

allow the water to cool down, then shut power off and power your spa up

again to reset the system.

AOH

Temperature inside the spa skirt is too high, causing the internal temperature

in the in.xe to increase above normal limits. Open skirt and wait until error

clears.

FLO

The system does not detect any water flow while the primary pump is

running. Check and open water valves. Check for water level. Clean filter.

If the problem persists, call your dealer or service supplier.

Prr

A problem is detected with the temperature probe.

Call your dealer or service supplier.

The water temperature in the spa has reached 108°F (42°C). Do not enter the

water! Remove the spa cover and allow the water to cool down to a lower

temperature. Call your dealer or service supplier if problem persists.

All trademarks or registered trademarks

are the property of their respective owners.

Smart Winter Mode

Our Smart Winter Mode protects your

system from the cold by turning pumps on

several times a day to prevent water from

freezing in pipes.

The "Smart Winter Mode" indicator

lights up when the Smart Winter

Mode is on.

Cooldown

While performing this task, the heater is not

allowed to turn on and its icon flashes.

www.geckoalliance.com

9919-101135-B