- ページ 15

除湿機 DanVex DEH-1900iのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。DanVex DEH-1900i 18 ページ。

DanVex DEH-1900i 操作マニュアル
Common Troubleshooting
Failure
Dehumidifier
cannot work
Dehumidification is
not ideal
Water leak
Abnormal noise
1.Where the above troubles cannot be fixed and repair is needed, please contact
supplieror distributor. Do not disassemble without authorization.
2.When the dehumidifier is in operation or stops, voice of circulating of refrigerating can
be heard. Such phenomenon is normal.
3.It is normal for the air outlet to drain hot air.
Instruction on Code of Failure
This dehumidifier is able to automatically judge failure. If there is any failure, there will be
failure code displayed on the humidity display window.
Controller error codes
Failure Display Problem
E1
Temperature sensor failure
E2
Humidity sensor failure
E3
Phase sequence failure (for 380V power supply devices only)
E4
Water tank full (for the devices equipped water tank only)
E5
High temp./pressure
E6
Low pressure alarm (leakage may happen inside)
www.danvex.fi
R
Cause analysis
1.Power cut
2.Power
switch
is
energized
3.Power
cord
is
connected
4.Fuse is melted
1.Dust accumulated in air
purification filter mesh
2.Object blocking air inlet
and outlet
3.The door or window is
open
4.Refrigerant is leaking
1.The machine is inclined
2.Water pipe is blocked
1.The
machine
is
placed solidly
2.The
filter
mesh
blocked
Method
1.Recover the power
not
2.Energize the power
3.Connect the power cord
not
4.Replace the fuse
1.Clear the filter mesh
2.Remove
the
object
3.Close
the
window
4.Contact with distributor or
manufacturer for repair
1.Level the machine
2.Remove
the
object
not
1. Place the machine firmly.
2. Clear the filter mesh.
is
14
blocking
door
and
blocking