- ページ 8
ドリル Constructor 5411074140878のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Constructor 5411074140878 13 ページ。 Electronic hammer drill
ページを印刷するSELECTING THE GEAR (FIG. 1)
The machine has two gear positions.
Position 1 combines low speed with high torque,
position 2 combines high speed with low
torque.
S et the gear selector (8) to the desired
position.
SWITCHING ON AND OFF (FIG. 1)
T o switch the machine on, press the on/off
switch (2). The further you press the switch,
the higher the speed of the machine.
T o switch off the machine, release the on/off
switch (2).
T o switch the machine to continuous mode,
keep the on/off switch (2) pressed and at the
same time press the lock-on button (1).
Subsequently release the on/off switch.
T o switch off continuous mode, press the
on/off switch (2) again.
TECHNICAL DATA
Mains voltage V
Mains frequency Hz
Power input W
No load speed min-1
Drilling capacity in
steel mm
wood mm
concrete mm
Chuck mm
Weight kg
LpA (sound pressure) dB(A)
LWA (acoustic power) dB(A)
Take appropriate measures for
the protection of hearing.
Weighted root mean square acceleration
230
50
1100
0-3200 / 0-1200
13
25
16
13
3
87
98
7.53 m/s2
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
replacement after extended use,
do not put it in the domestic
waste but dispose of it in an
environmentally safe way.
2011
Made in China
8