- ページ 4

サブウーファー AudioSource PSW100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AudioSource PSW100 5 ページ。 With active crossover

General Features and Specifications:

• 100W Amplifier (120Vac 60Hz)

Power Consumption 200W

•

• Front Ported Enclosure

• Down-firing 10" Mica Filled Polypropylene Woofer

• Rubber Surround

• Crossover Frequency Adjustment (30z ~ 180Hz)

• Level Adjustment

• Line Level Inputs (RCA Connectors)

• Speaker Level Inputs • Speaker Level Pass Through Outputs

• Power Switch

• Power Indicator

• 13.25" H x 11.13" W x 14.25" D

(337

H x 283

• Net weight: 24.2 lbs. (11.02kg)

W x 362

Line Level Connections

In this example, the subwoofer output of a surround

sound receiver, processor or other device is connected to

the PSW100's line level input.

As mentioned elsewhere in this manual if the subwoofer

output of the device connected to the PSW100 has its

own crossover frequency, you should be sure that the

crossover adjustment on the PSW100 is set to a higher

frequency than the crossover frequency of the connected

device.

Example: If your Surround Receiver has a subwoofer

output set to 80Hz, then you should set the crossover

frequency adjustment on the PSW100 to approximately

100Hz.

Note: You would never connect both the line level inputs

and speaker level input at the same time.