- ページ 5
サブウーファー AudioSource SW TwoのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AudioSource SW Two 10 ページ。 Powered subwoofer with built-in active stereo crossover and high intensity video shielding
AudioSource SW Two にも： オーナーズマニュアル (4 ページ), オーナーズマニュアル (4 ページ), オーナーズマニュアル (8 ページ)
ページを印刷する
All Components plug into the "RCA style" jacks on the rear panel of the PreAmp/Tuner Two.
Tape
Tape
Phono
CD
Rec
Mon
THESE CONNECTIONS ARE PICTURED IN "SET-UP DIAGRAM #1
Audio Connections
Phono: Plug the "Line Out" jacks of your turntable into these jacks.
C.D. : Plug the "Line Out" jacks of your C.D. Player into these jacks.
Tape Mon. : Plug the "Line Out" (Play) jacks of your cassette deck into these jacks.
Tape Rec. : Plug the "Line In" (Rec.) jacks of your cassette deck into these jacks.
Video 1 : Plug the "Line Out (audio)" jacks of your "Video 1 component" (TV/Monitor) into these jacks.
Video 2 : Plug the "Line Out (audio)" jacks of your "Video 2 component" (Laserdisk) into these jacks.
Video 3 : Plug the "Line Out (audio)" jacks of your "Video 3 component" (Stereo VCR) into these jacks.
Video 3 Rec. : Plug the "Line In (audio)" jacks of your "Video 3 component" (Stereo VCR) into these jacks.
Line Out 1 : Plug these jacks into the "Line In" jacks of a stereo power amplifier.
Line Out 2 : These jacks are provided as a convenience. They may be used to send the original signal to
another amplifier, or a powered subwoofer.
Video Connections
Monitor : Plug the "Video In" jack of your T.V. Monitor into this jack.
Record : Plug the "Video In" jack of your "Video 3 component" into this jack.
Video 3 : Plug the "Video Out" jack of your "Video 3 component" into this jack.
Video 2 : Plug the "Video Out" jack of your "Video 2 component" into this jack.
Video 1 : Plug the "Video Out" jack of your "Video 1 component" into this jack.
Note: When using an outboard processor or graphic equalizer, follow the additional connections in
"Set-up Diagram #2". All other connections are identical to "Set-up diagram #1".
THESE CONNECTIONS ARE PICTURED IN "SET-UP DIAGRAM #2
Audio Connections
1. Tape Mon. : Plug the "Line Output" jacks of your outboard processor into these jacks.
2. Tape Rec. : Plug the "Line Input" jacks of your outboard processor into these jacks.
3. Plug the "Line in" jacks of your cassette deck into the "Tape 1 Rec" jacks of your outboard processor.
4. Plug the "Line Out" jacks of your cassette deck into the "Tape 1 Play" jacks of your outboard processor.
Note: In this type of system, you can listen to your cassette deck by pressing the "Tape Monitor" switch
on your outboard processor.
Hooking It All Up
Video 3
Video 3
Video 2
Video 1
Line
Rec
Out 2
Monitor
Record
Video 3
Video 2
L
R
75 ohm
300 ohm
Line
Out 1
Switched
Video 1
GND
AM
Max Power
MODEL PreAmp/Tuner Two
Switched
Unswitched
AC 120 V 60 HZ
Max Power
Power Consumption
Max Power
500 w
500 w
17 w
200 w