- ページ 4

ステレオ・イコライザー AudioSource EQ 200のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AudioSource EQ 200 12 ページ。 Ten-band stereo graphic equalizer with spectrum analyzer display
AudioSource EQ 200 にも：オーナーズマニュアル (4 ページ), オーナーズマニュアル (7 ページ), オーナーズマニュアル (5 ページ)

ページを印刷する

Power

Tape 1-2 I Tape 2-1

Audio 1 Video

EQ I Bypass

EQ Ret

Line 1 Tape

Using The Controls

Power : Press this button to activate the power on the EQ 200. The LED will be green

to show power is "On". Push the button again to turn "Off' the EQ 200. The LED will

be red to show this selection.

Tape I-2ITape 2-1:

This button allows you to make a tape copy or "Dub" between the

two cassette decks. Press this button "In" to "Dub" from Tape 1 to Tape 2. The LED will

be green to show this selection. Leave this button in the "Out" position to "Dub" from

Tape 2 to Tape 1. The LED will be red to show this selection. When the "Line/Tape"

switch is "OUT", or in the TAPE position, This "Tapel-2/Tape 2-1" switch will select

which tape deck is to be listened to. Leave it "IN" for Tape 1, "OUT" for Tape 2.

AudWVideo

: This button selects between two input sources. Press the Button "IN" to

select an Audio input source, such as a C.D. player. The LED will be green to show this

selection. Leave the button "OUT" to select a Video input source, such as a V.C.R., or

Laserdisc player. The LED will be red to show this selection.

Note: the EQ 200 equalizes the soundof these various components. At no time does the

EQ 200 alter the picture, and no "Video-Type" connections are included. These inputs

will accept any "Line Level" source, such as a CD player, tape deck, laserdisc, VCR,

etc.

EQ /

Bypass

: Use this switch to instantly compare the "equalized" and unequalized"

sound. Press this button "IN" to hear the result of your equalization curve. The LED will

be green to show this selection. When this button is IN, theded LEDs in all twenty

sliders will light up. Leave this switch in the "OUT" position to bypass the equalization

of the EQ 200. The LED will be red to show this selection, and the red LEDs in the

sliders will disappear at this time.

Rec.

: EQ Record. Press this button to make a tape copy with the equalization curve

you have just set. The LED will be green to show this selection. This can be useful when

making a cassette tape to play in your car. A well-equalized tape can improve the sound

from smaller, less expensive car stereo speakers. With this button in the "Off" position,

the cassette tape copy will be recorded without equalization. The LED will be red to

show this selection.

Line

Tape

: This button selects between input sources. In the "In" position, the "Line

Input" is chosen. The LED will be green to show this selection. Leave this button in the

"Out" position to hear the "Tape Input". The LED will be red to show this selection.