- ページ 6

アンプ Audiotec Fischer Match PP 86DSPのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Audiotec Fischer Match PP 86DSP 15 ページ。 8-chanell amplifier with integrated 9-chanell dsp

ページを印刷する

Attention: After erasing the setups from memory

the MATCH PP 86DSP will not reproduce any audio

output.

Unique Features of the PP 86DSP

Class HD technology

The PP 86DSP combines the advantages of a

Class H technology with the principle of a class D

which easily outperforms any conventional Class D

By varying the internal supply voltage depending on

cy is close to maximum at any time.

Smart highlevel input

The latest generation of OE car radios incorpo-

rates sophisticated possibilities of diagnosing the

features (e.g. fader function) are often the result -

but not with the PP 86DSP.

The new ADEP circuit (Advanced Diagnostics Error

Protection) avoids all these problems without load-

ing the speaker outputs of the OE radio during high

volumes unnecessarily.

Start-Stop capability

The switched power supply of the MATCH

PP 86DSP assures a constant internal supply volt-

age even if the battery's voltage drops to 6 Volts

during engine crank. If the supply voltage drops be-

red) in order to avoid any further discharge of the

car's battery.

Status LED lights up

Automatic Digital Signal Detection

Switching from analog input to the digital input is

done automatically as soon as a signal is detec-

ted on the Optical Input. This feature can be deac-

tivated in the DSP PC-Tool software. Alternatively

you can use an optional remote control for manual

switching between analog and digital inputs.

Power Save Mode

The Power Save Mode is incorporated in the ba-

er consumption of the PP 86DSP and potentially

present for more than 60 seconds. Please note that

in many up-to-date cars with "CAN" or any other in-

ternal bus structures it may happen that the radio

remains "invisibly" turned on for up to 45 min. even

after locking and leaving the car! Once the "Power

Save Mode" is active the remote output and there-

MATCH PP 86DSP will reactivate the remote output

within a second if a music signal is applied. It is pos-

sible to either modify the turn-off time of 60 sec. or

completely deactivate the "Power Save Mode" via

the DSP PC-Tool software.