- ページ 8
スピーカーシステム Audiotec Fischer match MS 52CのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Audiotec Fischer match MS 52C 12 ページ。 Component- and coaxial speaker systems
Audiotec Fischer match MS 52C にも： マニュアル (7 ページ)
ページを印刷する
General instructions for connecting MATCH
speaker systems
We strongly recommend that you operate the com-
plete audio system at low volume before final in-
stallation. This will allow a trial listening test before
securing the loudspeakers into their mounting loca-
tions.
Make sure that all speaker wiring is fully protected
from cutting or wear at sharp edges. This can lead
into a short circuit which might damage your head
unit, amplifier and/or speaker system.
Make sure that all speaker wires have sufficient
length in order to reach the speaker terminals wi-
thout stress on the wire or connectors.
Features
Component systems
•
2-way component system with reduced moun-
ting depth for easy installation
•
Woofer with high damping coated paper cone
•
25 mm / 1" silk dome tweeter with
neodymium magnet
•
Separate, compact crossover with high-grade
components and tweeter protection
•
Grille, cables and mounting material included
in delivery
8
General instructions for mounting MATCH spea-
ker systems
Once you have tested the complete speaker system
and have confirmed correct operation, turn off the
audio system and prepare the loudspeaker for final
mounting.
1.
Place the loudspeaker in the mounting positi-
on as shown in the illustration „Mounting the
woofer".
2.
Fix the speaker with its mounting ring in its in-
stallation place and check if all screws are in
the right position to the fixing holes. Use the
included screw clips to secure the screws.
Tighten all screws evenly.
3.
Attach the mesh to the mounting ring.
Coaxial systems
•
2-way coaxial system with reduced mounting
depth for easier installation
•
Woofer with high damping coated paper cone
•
Integrated tweeter with polymer dome and
neodymium magnet
•
Grille, cables and mounting material included
in delivery