- ページ 7

ディスク・デュプリケーター Addonics Technologies HDUSASのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies HDUSAS 8 ページ。

This option will diplay the details of everything connected to the controller.

This option will display the system information.

7. USB Mode

NOTE: Though this is an active menu option, we recommend you not use

this option since there is no USB connection for this unit. This duplicator is

a standalone unit.

Troubleshooting

LCD

If the LCD display is blank after the device is turned on, check if the power

cable is properly connected and that the power supply is on.

Error Message

If an operation is manually terminated by pressing ESC while the system is running

a copy operation or hardware diagnostics, an error message will show up on the

LCD. This may lead to an illegal operation and cause the device to stop reminding.

If this happens, restart the device.

Source/Target

If the duplicator is unable to read the source or target please check that the data

and power cables are properly connected. When making a copy please make sure

that you set the source correctly.

Keys

If pressing the keys on the front panel produces no response from the system,

the keys may have malfunctioned.

Startup/Shutdown

Do not suddenly turn off the power while the system is performing an operation.

After shutting down normally, wait a moment (usually around 2 seconds) before

restarting the system so it can run self-diagnostics.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/