ページを印刷する
DCS-8240
Uneven Sound
If you put the insulation unevenly, this can result in uneven sound. Make sure to put in the same amount
of insulation around each speaker. If some speakers are packed tightly, while others just have the
insulation loosely around them, you will end up with different levels of sound absorption.
Sound Warping
If the sound coming out of your ceiling speakers is loud enough, but seems to be warped or distorted,
your treble or bass levels may need to be adjusted.
If there are not many pieces of furniture in the room and the floor has no carpet or rug, then you will most
likely have to set your treble to minus. With very little in the room to absorb the sound, too much treble
can make the sound bounce off the fixtures in the room, making it sound tinny.
Product Specification
Model:
Rated power:
Line voltage:
Power taps:
DC impedance:
Speaker size LF:
Speaker size HF:
Frequency response:
Sensitivity:
Material:
Grill:
Color (gril):
IP rating:
Mounting hole:
Dimensions:
Weight:
Dimensions
Design and product specifications are subject to change without prior notice.
Product code: D6581
DAP DCS-8240
40 W
100 V
10 W / 20 W / 40 W
5,8 Ω
8 inch
1 inch
50–20 kHz
90 ± 3 dB
ABS
Powder-coated iron mesh
White, RAL 9016
IP40
Ø 260 mm
297 x 127 mm (D x H)
2,83 kg
Website:
www.dap-audio.info
E-mail:
6