ページを印刷するOperating the CD/USB Player
1. Opening and closing of the disc holder
• Turn the unit's power on. Press the OPEN/CLOSE-button to open the disc holder.
• The disc holder cannot be opened during playback, to prevent playback from being interrupted if
the OPEN/CLOSE button is pressed accidentally. Stop the playback first, then press the OPEN/CLOSE
button.
2. Loading CD's
• Hold the disc by the edges and place it in the disc holder, then press the OPEN/CLOSE button to
close the holder.
CAUTION:
• Do not place any foreign objects in the disc holder and do not place more than one disc in the disc
holder at a time.
• Do not push the disc holder in manually when the power is off, as this may result in malfunction and
damages the player.
3. Selecting Tracks
• Press the SKIP-button to move to next higher or lower track. The selected track will be displayed in the
display. The figure below shows that track 2 is selected.
• Hold the SKIP button to change tracks continuously at a higher speed.
• When a new track is selected during playback, playback begins as soon as the skip search operation
is completed.
• If the Skip-button
If the Skip- button
4. Starting Playback
• Press the PLAY/PAUSE button to start playback when you've just loaded a new CD or selected a
track from the (optional)USB stick. or press the PLAY/PAUSE during the pause condition to restart
playback.
5. Stop Playback
There are two ways to stop playback:
1. Press the PLAY/PAUSE button during playback to pause at that point.
2. Press the STOP button during playback.
6. Pausing
• Press the PLAY/PAUSE button to switch between play and pause. The display in the figure below
shows the CD-player in PAUSE mode.
is pressed while at the last track, the first track is selected. In the same way,
is pressed while at the first track, the last track is selected.
11