ページを印刷するTroubleshooting
DAP Audio MXPA-80.
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1. If the device does not operate properly, unplug the device.
2. Check the fuse, power from the wall, all cables, etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If you are unable to determine the cause of the problem, do not open the amplifier, as this may
damage the unit and the warranty will become void.
5. Return the amplifier to your Dap Audio dealer.
Product Specifications
Model:
Power supply:
Fuse:
Inputs impedance
and sensitivity:
Frequency response: 63Hz - 10kHz
Tone control:
THD:
Signal / noise ratio:
Outputs for speakers: 4Ω, 8Ω
Outputs for speakers: 70V,100V
Output power:
Indicator:
Dimensions :
Weight :
Design and product specifications are subject to change without prior notice.
DAP Audio MXPA-80
230 VAC, 24VDC
230V: 1.5AT
115V: 3AT
Mic: -55dBV 5KΩ Balanced
Line: -10dBV 5KΩ Balanced
Aux: -20dBV 10KΩ Unbalanced
High filter: 250Hz (-3dB)
Phantom: 24V
Telephone paging function sensitivity: 120mV
Treble: ±10dB at 10kHz
Bass: ±10dB 100Hz
≤ 0.5%(1KHz-nominal power capacity)
Mic: > 65dB
Line: > 65dB
AUX: > 75dB
80W at 4Ω, 8Ω, 70V, 100V
Power level meter
483 x 360 x 89 mm (LxWxH)
9,1 kg
Website:
Email:
www.Highlite.nl
16