- ページ 4
室内装飾品 DURASTEEL Simple Work TableのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。DURASTEEL Simple Work Table 11 ページ。 Wooden table
ページを印刷する
• Simple Work Table w/ Undershelf
Install w/ Standard Table Legs and Undershelf
1
2
*Table Legs and Undershelf are optional.
If you would like to assemble DuraSteel Galvanized Table Legs and Undershelf with your Wooden Top Shelf, please order them by refering to Page 8.
The screw holes are pre-drilled on the wooden tabletop, it is easy to fasten the screws with a screwdriver. If the holes are not wide
enough, please follow the hole position to redrill 25mm deep holes with 5mm drill bit.
1
1. Assemble undershelf and legs
Marking the position on the legs by tape for the
height of the undershelf (Recommend at least 8"
above the floor). Slide Legs into the socket of
undershelf, then, fasten the Allen screws.
3
3. Measure the positions of leg sockets
Ensure the leg assembly in the middle of shelf.
Adjust the leg sockets and shelf edge to parallel,
and fix sockets to shelf with self-tapping screws.
3
4
5
2
6
Top Shelf (1)
Table Legs (4)
Leg Sockets (4)
7
Undershelf (1)
Self-Tapping Screws (16)
Allen Screws (16)
Allen Wrench (1)
2
2. Assemble legs and leg sockets
Place carton underneath wood shelf for padding to
avoid scratching. Place leg sockets on the corners of
wooden shelf, and insert legs into leg sockets. (Do
not fix the sockets right now.)
4
4. Fasten legs to leg sockets
Using Allen wrench and screws to fasten legs to
leg sockets. Then, turn the whole unit upside, and
it is ready to use!