- ページ 12

アンプ DAPAudio D2680のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。DAPAudio D2680 16 ページ。 8 zones multiroom system

Keypad Panel Features and Functions.

24. Function LED

This LED lights if function mode is selected. In function mode you can select source 1-6 using the Up

(29) and Down (28) buttons.

25. Volume LED

This LED lights if volume mode is selected. In volume mode you can adjust the volume using the Up

(29) and Down (28) buttons.

26. Select/ Call Button

The select switch lets you select Volume, Function, Treble or Bass mode. The corresponding LED

indicates the selected mode. Pressing the select switch 3 seconds selects the Call function. The

keypad call function only works in combination with the optional LED display. If a LED display is

connected, the corresponding LED will light indicating a call from that certain keypad.

27.

IR receiver

Use in combination with the infrared remote control.

28.

Down

Use this button together with the Up (29) button to adjust the Volume, treble and bass level or to

select source C1-C6.

29. Up

Use this button together with the Down (28) button to adjust the Volume, treble and bass level or to

select source C1-C6.

30. Display

If the unit is turned on, the LED display will show the selected source, the volume bass and treble level

depending on the selected mode.

31. Treble LED

This LED lights if treble mode is selected. In treble mode you can adjust the treble level using the Up

(29) and Down (28) buttons.

32. Bass LED

This LED lights if bass mode is selected. In bass mode you can adjust the bass level using the Up (29)

and Down (28) buttons.

33. Power Button

Press to turn on the keypad and activate the corresponding zone.

34. Call LED

This LED lights if Call (panic) mode is activated. Call mode is selected by pressing the Select/ Call (26)

button for more than 3 seconds or use an external switch connected to the Call Switch Terminal (36).

35. Camera Scan Jumper

If the jumper is removed, the camera scan function is disabled and the keypad's Video Output (37)

will block the camera scan signals. If the jumper is in place, the camera scan function is enabled.

36. Call Switch Terminal

Use this terminal to connect an external Panic/ Call switch. The keypad call function only works in

combination with the optional LED display. If a LED display is connected, the corresponding LED will

light indicating a call from that certain keypad.

37. RCA Video Out

Connect this output to a TV or composite Monitor.

Fig. 7